Quote:
Originally Posted by Viatron
Towed does the piece of box you have used to lower have any reinforcement inside it? If not then you may want to check it after some miles have been put through it to check it hasn't started collapsing?
|
Aware of the collapsing lowering block issue thanks to Phil. I welded strengthening blocks into the original, but the 40mm box section I used this time is double the thickness in the walls, so should be fine. I've also now received a pair of 150lb Spitfire springs and when I get around to fitting them I might just raise the rear suspension again anyway.
All good fun this tinkering lark