As I said earlier the tank I used was from a VW beetle, it has a return and the take off is on the bottom this was able to take a 15mm feed line for the high pressure pump.
The high pressure pump simply bolts to the cage frame with a re-used exhaust clamp
The upper rear part of the cage frame has reinforced as this will take the seat belts and give me some where to "bolt-on" my body.
The front of the cage frame also has some extra bracing to support the steering column and again give me some where extra to "bolt-on" my body
I have also fitted a set of MGF wheels £70 of E-Bay
. They fit with no spacers but are very close to the rear tie bar (had to remove the wheel balance weight). I also had to get the wheel nuts made-up.
I will be setting up the body tub and bonnet over the next few days.
