I wish I had taken the seats out before trying to do the dash rebuild. So much more room and so easy to do.
Seat fully back and up.
Remove 2x13mm front nuts.
Seat fully forward and up.
Remove 2x17mm rear bolts.
Tilt seat and remove 16mm seat belt bolt.
Unclip the eletrical connectors under the seat (3 on my car)
Lift seat out.
Collect £3.27 and a plastic ball that was stopping the passenger seat dropping down properly. This was why Chris felt so wind battered during the drive to the station, his seat was 3 inches hugher than mine so his head was above the windscreen
|