Quote:
Originally Posted by peterux
The downside of steel fuel pipes, as we all know, have a tendency to rust from the outside and unfortunately the hand pipe bender I'm using has scratched the coating off in places. So once I'm happy with all the routing and mounting points, I'm going to strip it all off and give the pipes a coat of paint.
...peter
|
I've just taken another look at the spec for the steel fuel lines and found that beneath the PVF coating is a zinc plating layer so some scratches in the PVF coating may not be a big issue. For anyone interested this is the manufacturer...
http://agscompany.com/product-catego...s/poly-armour/
I've now left an offcut out in the rain to see how well it survives.