Quote:
Originally Posted by raasayphil
Thanks for that - I've heard of this but not come across anyone who has used it. I'll get some and give it a go.
Thanks
|
Yeah - it's good stuff.
I used it on my trailing arms, diff case & drive shafts. One thing to note is that it's not UV stable, so it's good for stuff that's not in direct sunlight all the time (hence use on the running gear and any scratches or dings on the underside of the chassis).
You can top coat it with something that is UV stable if required - I did this with my front uprights. Bottom coat was POR15, then a top coat of Matt Hamerite to match the powdercoat of the suspension wishbones.
I also used POR engine enamel on the block which is holding up very well.