I thought the angle grinder would be too fierce and hard to control in the limited space.
I plan on using POR15 Metal Prep, wash it down and then silver POR15 before top coating it in gloss black.
POR15 will degrade in UV so the top coat is important.
The washing off of the metal prep is worrying me as I am stuck inside a garage. Perhaps wash off and leave an air heater on overnight.
I still need to get the back of the car prepped before that which is probably tomorrow taken care of. I will try the angle grinder and wire wheel on the ARB and use that for the first test of Metal prep, POR15 and top coat as that is free standing and easy to work on. That might help me plan the car underbody painting.
|