The boot box in front of the fuel tank is now done but I chickened out of cutting the boot support outriggers? but I have a devious plan where I cut them off and re weld them on at a new angle to support the boot and keep the DVLA happy.
[IMG]
[/IMG]
I would like to get the car running before the body goes on So I stared on the electrics I had to re-modify the modified dash. And fitted in place with a grate deal of very accurate guesswork
[IMG
][/IMG]
[IMG]
[/IMG]
This makes the wiring behind the dash much easier to install as you can see.
[IMG]
[/IMG]
But I realise that the gear box cover will be very awkward to make/fit when the dash is fully installed so I have also made a start on that.
[IMG]
[/IMG]
I also worked out that the brake master cylinder will be too tall for the body so I have sent for a later tandem unit which will mean a little bit of re-pluming Doh