Week 6 update...........
As mentioned in last weeks update, I have now removed the windscreen.
Windscreen out by
marlinpeter, on Flickr
I used a variety of knives, blades and Unibond silicone dissolver.
Windscreen marking by
marlinpeter, on Flickr
The front windscreen is BS marked but not ECE marked. I believe this is currently allowed as an exemption at the IVA test, but may not be when I get there. The screen is showing some early signs of de-lamination in one corner, so may have to be replaced anyhow.
I had decided to replace the heater matrix with a new one as I didn't want a 20 year old clogged up matrix as part of the cooling system. (Another ebay bargain)
Heater matrix by
marlinpeter, on Flickr
It was a good job I'd bought a new matrix as the old was frost damaged.
Heater matrix by
marlinpeter, on Flickr
I'm also working on a solution the clutch and brake pedal box. The Sierra is a cable clutch so I need to find a solution for a hydralic clutch master cylinder and pedal box. Whilst searching for an aftermarket peadl box (which seem to start at about £180!!) I came across one of these....
BMW pedal box by
marlinpeter, on Flickr
It's from a e46 BMW and is extremely well designed and manufactured.
I've done some initial trials and it's looking good......
Pedal box trial by
marlinpeter, on Flickr
Pedal box trial by
marlinpeter, on Flickr
Here you can see how the brake pedal lines up with the servo input rod. I need to find a suitable threaded eye or rod end to join it together. I also need to notch the pedal box frame to get to all of the servo nuts.
This will be my focus for the coming weeks....
...peter
(more pictures and details if you want on my Flickr site)