View Single Post
Old 20th October 2020, 16:32
Lucky@LeMans Lucky@LeMans is offline
Senior Member
Join Date: Aug 2012
Posts: 2,019
Lucky@LeMans is on a distinguished road

Ok, so you'll be eliminating the head gasket once a new one is fitted and torqued down. It can be a pain in the ar** getting to the bottom of these sort of faults !

Put a straight edge across the head just to make sure it is flat before you reassemble it.

Last edited by Lucky@LeMans; 20th October 2020 at 19:57..
Reply With Quote