Dual Circuit Brakes
Balance bar pedal box is the ultimate but very difficult to retro fit in most cars.
The picture you have is one floor mounted, Burton,s do a bulkhead mounted one with hanging pedals which I am using in my car.
However, look at E-Bay number 282234925508, this fits straight onto the standard Scimitar pedal box, change the pushrod for the existing one and a little bit of re-piping to do.
As to servos, I have had two of the remote type fail on me, luckily at slow speeds, so I dislike them and run all my cars without them. If you can cope with a slightly higher pedal pressure, I find the Scimitar brakes to be better without a servo and the MOT tester has no problems with the setup.
SteveD
|