Epic Saturday - Part 1:
To be honest, I just couldn't face tackling the passenger seat, as yesterday's efforts really tested all of my resolve.
So I decided to start with some cleaning instead…
Found the old fuse box cover.
Once that was
cleaner it was fitted over the redundant box attached to the bulkhead.
The front suspension and the engine bay were next.
Before:
After:
I also zip tied the oil pressure gauge wires out of the way.
Yesterday, I had jacked up the car to get better access for fitting the seats.
So I cleaned up the chassis and rear exhaust pipes.
The wheels & tyres were next.
As they had picked up a few marks along the way.
Unfortunately, I discovered some of the dirt was actually overspray of blue paint from the original donor car!
So I will come back to that another day.
Then the wheel centres could be fitted.
And I was surprised at the difference these make .
At this point, there were no more little cleaning jobs to do, so I had to face fitting the passenger seat…
End of Part 1…