Thanks for the comments guys.
Just been out to take the clamps off the passenger door and it’s actually not too bad. Much better than I thought it was going to look like. As with the drivers door skin, there’s some adjustment needed on the lower edge which I can get through the adjustable clamps, and at the front edge of the door where it meets the sill there’s still too large a gap; I already adjusted this before fitting the sill as the passenger side of the kit is a bit out but will need some further filling.
Will get some pictures up hopefully later or tomorrow once the window and mirror is back on. Might even get to run it up and down the road outside of the house now both doors are on!
|