Steering Column Bracing
I thought long and hard about this mod and reviewed the threads at the time.
I do not have the movement on the steering wheel to warrant any additional bracing, as I said I monitored this part of the build looking for the movement others described.
I have securely locked all the clamps up including the underneath one and tightened the wheel height adjuster up (via the bolt not just the arm).
I have added spacers to lower the wheel, I will be running with the wheel at its lowest (if anything its still too high) and it is rock solid with the Rover wheel on and will be just the same if not better with the after market one that I will fit after SVA.
There are 5 bolts holding it in position with the half flexible bracket locked up tight on to the column and its good for me.
JohnC
|