Bonnet continued
Right tried out a few things tonight just to see how it went, VHT Strip Fast certainly lifts the paint into a gooey mess and I didn’t leave it on long then scraped it of quickly, this seems to not have attacked the glass underneath, mind you it wasn’t on long. Cleaned back with spray gun cleaner, “Neogene”, can’t leave that on to long either, that will attack the glass, next put down some Nitromors and a spray of VHT Strip Fast over the top, left for a minute or two then with a soft brush rubbed it around then scraped of the mess, that seemed to work as well so I think about ten hours of stripping and sanding back I may have a workable mould, I will just have to see….