Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin Sportster, Cabrio, Berlinetta and Roadster builds

Marlin Sportster, Cabrio, Berlinetta and Roadster builds Enthused or Confused about your vintage Marlin build? Ask away here or show off your build.

Reply
 
Thread Tools Display Modes
  #1  
Old 15th September 2009, 21:53
AndyDane AndyDane is offline
Senior Member
Enthusiast
 
Join Date: Jan 2005
Posts: 147
AndyDane is on a distinguished road
Unhappy Expansion Tank

OK, I admit it - I know nothing about engines and cars!!

I would have thought fitting an expansion tank would be simple..... but google is not my friend any more...

Do I need an expansion tank or a header tank? sealed and pressurised or not?

I've found so many contradictory articles I'm lost...

This is my "plumbing" at the moment - radiator connected to "engine" and the overflow linked effectively in the circuit. I have no heater to complicate issues...

http://www.flickr.com/photos/7757983@N07/3924362942/
Where should my expansion tank go? I think in the loop between the "overflows". But expansion tanks seem to have overflows on them that would idicate the system is no longer "pressurised" and sealed - or have I lost the plot ?

Last question - does it matter where it goes vertically in relation to the rest of the system?

Last edited by AndyDane; 15th September 2009 at 21:55.. Reason: Add image link
Reply With Quote
Available from eBay
  #2  
Old 16th September 2009, 06:58
chrislandy chrislandy is offline
Senior Member
 
Join Date: Oct 2008
Posts: 383
chrislandy is on a distinguished road
Default

The header tank/expansion tank is the same thing if it plumbed into the main system - you essentially mount it as the highest point of the cooling system and half fill it to allow for the air to be compressed inside, it helps if you feed a small coolant pipe into it as well so the water does not become stangent.

Another option is the way you have it plumbed up at the moment (partly), the overflow pipe next to the filler on the rad should be vented to either air or the bottom of a catch tank so if a vacuum is formed inside the cooling system once it has cooled down the water gets sucked back into the system instead of air being drawn in. If you use this method the un-pressurized expansion tank should be vented at the top to free air.

hth
Reply With Quote
  #3  
Old 27th September 2009, 20:45
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 2,940
peterux is on a distinguished road
Default

Hi Andy,
not sure if you're sorted but here's a picture of my header tank.



The lower outlet goes to a tee piece into the hose that goes to the heater and the small hose at the top goes to the tee piece in your top radiator hose.



The tank is made by Ford but I bought mine direct from Westfield off their website.

http://www.westfield-sportscars.co.u...earchCriteria=

Hope that helps?

cheers

Peter
Reply With Quote
  #4  
Old 27th September 2009, 21:45
GreatOldOne's Avatar
GreatOldOne GreatOldOne is offline
Senior Member
Enthusiast
 
Join Date: Sep 2005
Location: Northampton, UK
Posts: 1,886
GreatOldOne is on a distinguished road
Default

More pics of expansion tanks:

http://www.greatoldone.co.uk/Site/Bu...pansion_2.html

http://www.greatoldone.co.uk/Site/Bu...At_Last_2.html

Mine is a standard BMW tank, just like Robins.
Reply With Quote
  #5  
Old 17th October 2009, 09:11
RobDorey RobDorey is offline
Senior Member
Enthusiast
 
Join Date: May 2006
Location: Dorchester
Posts: 101
RobDorey is on a distinguished road
Default

On the same subject as cooling, I stumbled on a discovery.
My car was running very hot at about 95C-105C.
It's got an M50 engine fitted with a 91C thermostat with an early M10 type radiator.

By drilling three 5mm holes at the top of the thermostat the temperature is a lot lower.

Warming up time is a little longer but the car now runs at 80C-85C on the road raising to 95C in a traffic jam.

I think that the stat wasn't quick enough for the smaller rad or something.
Reply With Quote
  #6  
Old 8th January 2010, 02:08
ema ema is offline
Junior Member
 
Join Date: Jan 2010
Posts: 3
ema is on a distinguished road
Default

Whoa!Thanks for all of these. Got kind of confused also about this one. I though I already saw a good step by step procedure of placing this Mr Gasket Expansion Tank that I just purchased. The closest that I found was this http://www.ehow.com/how_4508550_repl...y-tank-vw.html which also didn't work.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 09:22.

copyright madabout-kitcars.com 2000-2021
terms and conditions | privacy policy