Quote:
Originally Posted by TAZ
Hi, can I ask how you have fixed your headlamp buckets? Have you just screwed in to the fibreglass or have you fitted spring clips or other retainers?
Also, I have the chrome finishing rings to fit over the headlamp, but if I position the headlamp buckets correctly, the retaining screw is on the bottom, meaning that I can tighten it. There must be a way but I'm not seeing it.
|
Hi. I just drilled small holes and then screwed the buckets into the fibreglas, will add some clips at the rear once all painted just to add a little security. For the chrome ring just drill a hole at the bottom then you can get a screwdriver up from underneath. Hope that makes sense.see pic.
Hybrid Mode
