exhaust trim for SVA

[Patrick]

I think that the exhaust is going to fall into the radius SVA test and it will fail on that as its got quite a sharp edge. The best solution I've found so far is:

http://cgi.ebay.co.uk/UNIVERSAL-CHRO...QQcmdZViewItem

But they are £15 each and I would need 4!! Does anyone know of something cheaper I can bolt on that will put a nice radius on the ends?

They are 3" tips so something about 80mm should work.

Here's a pic of the current tips:

[Patrick]

I think i just figured out the answer to my own question - a rear difuser to take the exhaust out of the radius requirement test...

Although if you do have an idea please still let me know