Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Vintage and Classic Roadster Kit Car Builds

Vintage and Classic Roadster Kit Car Builds For Vintage and Classic era kit cars. Post your build reports, problems and progress here

Reply
 
Thread Tools Display Modes
  #61  
Old 17th December 2012, 16:49
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by Alanlionheart View Post
Hi Peter
.....However, my question is in regard to what you use to "clean up" the chassis and other parts as I have never done this before?
Also, although I am OK about Hammerite I notice that they have a variety of options including a waxoyl product designed for protecting a chassis and general underbody. Is that what you have been using?
Hi Alan,
welcome to the world of kitcars!!
How to 'clean up' donor parts, well that's a long subject worthy of it's own thread but I'll briefly describe what I do....
If it's really oily and greasy the most effective and fast cleaner is just neat petrol. Not very environmentally friendly or safe but it is the most effective. (I think garages use a paraffin based parts cleaner.)

If the item is just dirty and not too oily I use Bilt Hamber 'Surfex HD' which works very well.
For de-rusting I use Hammerite 'Rust remover gel' (thanks Robin!) but if it's small enough to immerse the part I use Bilt Hamber 'Deox-C'. I just mix up a bucket full and pop them in overnight and they come out the next day with no rust. You must clean them with Surfex HD first or it doesn't work so well. I call it my magic potion!!

On my chassis it was just a case of lots of elbow grease. Basically a variety of wire brushes in an electric drill and lots of emery paper on a rubber sanding block.
For degreasing before painting and for cleaning small parts like bearings, engine parts, CV joints, etc, I use Brake Cleaner.
There are lots of exotic anti-corrosion paint coverings available but most are very expensive. For this build I'm just sticking to black Hammerite Satin. It will probably last longer than me!!

Finally, if you are a complete novice then I can recommend you start buying a couple of the kitcar mags as they have lots of articles and reviews of the various preparation methods, etc.

Good luck.....


....peter
Reply With Quote
  #62  
Old 20th December 2012, 11:16
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Week 17 update......

As the festive preparations start, car building has slowed down but here's a small update and hopefully useful for any other Sierra based kitcar builders.

The Sierra suspension rear cross-member, or beam, is mounted to the chassis with too very large rubber bushes that are nearly 4" in diameter.
You can see them here at the top of the picture...


Rear suspension by marlinpeter, on Flickr

The Haynes manual doesn't cover how to replace these bushes and a trawl of internet forums suggested that these are notoriously difficult to remove with suggestions ranging from drilling them out to burning them out with oxy acetylene torches!!

Now normally I remove rubber bushes with a large socket, a length of threaded studding and some nuts and washers. Obviously I don't have a 4" socket but I did have a length of 4" ventilation pipe left over which is just the right size.


Cross-member bush removal by marlinpeter, on Flickr

An old crush tube and a nut on the other side.....


Cross-member bush removal by marlinpeter, on Flickr

Just wind up the nuts and the bush just popped out without any effort.

Note: new Internet folklore = these bushes are really easy to remove!!

Here's a picture of one of the old bushes and a new poly bush version.


Rear Crossmember bushes by marlinpeter, on Flickr

So as this is my last update before the festivities begin, I'd like to wish everyone a Happy Christmas and and a productive kitcar building and driving in 2013!


Christmas 2012 by marlinpeter, on Flickr

The Christmas card is courtesy of the Royale Owners Club - nice one!

.....peter
Reply With Quote
  #63  
Old 22nd December 2012, 20:45
seanick's Avatar
seanick seanick is offline
Senior Member
 
Join Date: Nov 2011
Location: Emsworth
Posts: 810
seanick is on a distinguished road
Default

Nicely popped Peter.
Merry Christmas!
Reply With Quote
  #64  
Old 22nd December 2012, 22:34
Sorton Sorton is offline
Member
 
Join Date: Mar 2010
Location: N. Dorset
Posts: 85
Sorton is on a distinguished road
Default

From your report so far, Peter, the Sabre looks like a well made kit and the finished car should be a pleasure to own. I have always thought it has really good lines.

Hopefully, I will be able to get back into the garage one of these days but at the moment I am fully occupied taking care of her indoors.

To all readers of this super forum, Happy Christmas and good building in 2013.
Reply With Quote
  #65  
Old 23rd December 2012, 10:41
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by seanick View Post
Nicely popped Peter.
Merry Christmas!
Quote:
Originally Posted by Sorton View Post
To all readers of this super forum, Happy Christmas and good building in 2013.

Thanks guys, have a nice Christmas!
Reply With Quote
  #66  
Old 30th December 2012, 16:17
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Week 18 update.........

I managed a couple of hours down at the lock up today between showers and while Pauline was off to the 'sales'

Before Christmas I managed to clean up and repaint the rear beam.
Replacing the rear beam bushes with the new poly bushes was a bit more of a challenge than getting the old rubber ones out, but this arrangement finally forced the bush into place. (The nuts you can see are just acting as spacers to allow the top edge of the bush to pop into place.)


Rear beam - bush replacement by marlinpeter, on Flickr


Rear beam - bush replacement by marlinpeter, on Flickr


Rear beam - bush replacement by marlinpeter, on Flickr

I've started to paint the rear end of the chassis. This is the second coat and is still wet.


Chassis - rear end repainting by marlinpeter, on Flickr



So that's the last update this year.....

.....peter
Reply With Quote
  #67  
Old 16th January 2013, 17:02
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Week 20 update.....

well to be honest, I don't have a lot to show for the last couple of weeks due to a combination of the weather and 'domestic things' taking up my spare time.
But I have reached a significant milestone.... I've finished painting the chassis and the build can now begin


Chassis - painted! by marlinpeter, on Flickr


Chassis - painted! by marlinpeter, on Flickr


.......peter
Reply With Quote
  #68  
Old 17th January 2013, 09:02
garyh garyh is offline
Senior Member
 
Join Date: Jun 2011
Location: birchington, kent
Posts: 1,769
garyh is on a distinguished road
Default

Will you be keeping the same body colour?
Reply With Quote
  #69  
Old 17th January 2013, 14:26
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by garyh View Post
Will you be keeping the same body colour?
Probably not as my Marlin Sportster is almost the same colour.
I quite like the 'two-tones' but really that decision is a long way off


Royale Sabre kit-car by Albert S. Bite, on Flickr


Vintage Car - Royale Sabre [RSX 45M] 110710 Leighton Hall by maljoe, on Flickr


Vintage Car - Royale Sabre [LSV 877] 110710 Leighton Hall by maljoe, on Flickr
Reply With Quote
  #70  
Old 17th January 2013, 15:24
garyh garyh is offline
Senior Member
 
Join Date: Jun 2011
Location: birchington, kent
Posts: 1,769
garyh is on a distinguished road
Default

So, will it be one of these above? Or have you come up with a different combination?
Reply With Quote
  #71  
Old 17th January 2013, 15:39
Mike Mike is offline
Senior Member
Enthusiast
 
Join Date: Jan 2007
Posts: 932
Mike is on a distinguished road
Default

Quote:
Originally Posted by peterux View Post
Probably not as my Marlin Sportster is almost the same colour.
I quite like the 'two-tones' but really that decision is a long way off


Royale Sabre kit-car by Albert S. Bite, on Flickr


Vintage Car - Royale Sabre [RSX 45M] 110710 Leighton Hall by maljoe, on Flickr


Vintage Car - Royale Sabre [LSV 877] 110710 Leighton Hall by maljoe, on Flickr
I really like wire wheels on period cars - I think the blue one looks lovely, - but I do get the steel wheels too, as they are just as appropriate.
Wires are just so damn expensive - and several people have told me they are high maintenanace: not a good combination - high price and lots of after care!
Reply With Quote
  #72  
Old 17th January 2013, 16:46
garyh garyh is offline
Senior Member
 
Join Date: Jun 2011
Location: birchington, kent
Posts: 1,769
garyh is on a distinguished road
Default

I agree, the alloys don't do anything for it.
Reply With Quote
  #73  
Old 18th January 2013, 13:58
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by garyh View Post
So, will it be one of these above? Or have you come up with a different combination?
It'll be on steel wheels or or maybe wires, but the colour options are still wide open.
I hope to see some finished cars at shows this year before making up my mind.
Reply With Quote
  #74  
Old 19th January 2013, 13:18
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default Fun down at the lockup

It was fun down at the lockups this morning.....


Fun in the snow by marlinpeter, on Flickr


Fun in the snow by marlinpeter, on Flickr
Reply With Quote
  #75  
Old 23rd January 2013, 16:56
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Week 21 update......

After finishing the painting last week meant that I could get back to spannering and start bolting bits back together.

First up was refitting the rear beam followed by the two trailing arms and (temporarily) the shock absorbers.


Rear beam and trailing arms by marlinpeter, on Flickr

The rear bump stops are as rare as 'hens teeth'.

Unfortunately, the shocks that came with the kit were for a Granada and the wrong length for the Sabre, so I decided to try these Japanese KYB shock absorbers.


Shock absorbers by marlinpeter, on Flickr

After a trial fit of the rear beam, it became clear that I needed the top part of the bush.


Rear beam poly bush by marlinpeter, on Flickr


Rear beam poly bush by marlinpeter, on Flickr

View from below. The smaller bolts are 7/16 inch UNF but I have no idea why.

Rear hubs have been refurbished with new bearings and grease seals.


Rear hubs fitted by marlinpeter, on Flickr


I've fitted the differential/final drive but the bad news was that the Floflex mount didn't fit so I've put the Ford part back.


Final Drive fitted by marlinpeter, on Flickr

Next up will be the rear springs, half shafts and then a quick go round with the torque wrench before putting the rear wheels back on.


........peter
Reply With Quote
  #76  
Old 23rd January 2013, 17:21
AcC8braman's Avatar
AcC8braman AcC8braman is offline
Senior Member
 
Join Date: Mar 2012
Posts: 294
AcC8braman is on a distinguished road
Default

Peter,

What a great re-build you are doing.

Well done

Can't wait to see this one on the road, I forget, has it been registered yet or needs IVA?

I have that joy this year

Keep up the good work
Cheers

Steve
Reply With Quote
  #77  
Old 23rd January 2013, 21:22
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by AcC8braman View Post
Peter,

What a great re-build you are doing.

Well done

Can't wait to see this one on the road, I forget, has it been registered yet or needs IVA?

I have that joy this year

Keep up the good work
Cheers

Steve
Thanks for the feedback.
A quick summary for you and anyone else joining the story late.....

The Royale Sabre Chassis was made in 1994 and the build presumably started shortly after. The car was upholstered in 1997 but the car was never finished or registered. The story I was told was that the guy building it didn't put any antifreeze in the cooling water which froze and split the engine block. After that he lost heart and never finished it. It then languished in garages or under tarpaulins until I bought it last August (2012).

So yes, it will now need IVA testing before I can register it.

Enjoy your IVA


...peter
Reply With Quote
  #78  
Old 24th January 2013, 20:55
Patrick's Avatar
Patrick Patrick is offline
Senior Member
Enthusiast
 
Join Date: Feb 2005
Location: Hampshire
Posts: 2,495
Patrick is on a distinguished road
Default

Good stuff, it's looking great
Reply With Quote
  #79  
Old 24th January 2013, 22:18
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Quote:
Originally Posted by Patrick View Post
Good stuff, it's looking great
Thanks, Patrick.It's certainly coming along nicely now but I can't wait to start playing with engines again
Reply With Quote
  #80  
Old 30th January 2013, 17:17
peterux's Avatar
peterux peterux is offline
Senior Member
Enthusiast
 
Join Date: Mar 2005
Posts: 3,075
peterux is on a distinguished road
Default

Week 22 update.

This week I've refitted the rear springs and drive shafts.


Rear springs and drive shafts by marlinpeter, on Flickr

Which means that I now have a rolling chassis again!


Rolling Chassis complete by marlinpeter, on Flickr

Now I can get back to engine fitting trials


........peter
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 7 (0 members and 7 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 23:40.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy