dna 250 california

ferrep63 · #1 20th May 2016, 22:03

hi all,z3's in the garage,start stripping saturday....

Paul L · #2 21st May 2016, 08:54

ferrep63 - Welcome to the forum.

The Tribute Z3 based builds give the impression that the strip down process is quite straight forward.

It will be good to see how the DNA kit goes together.

Feel free to post lots of photos, as build threads need photos.

Good luck, Paul.

tricky360 · #3 21st May 2016, 10:58

Good luck with the build
Post as much pics and info on here and the Dna owners forum

Strip down shouldn't take to long , maybe a good days work
Are you going to sell the parts ?

ferrep63 · #4 21st May 2016, 18:29

hi tricky,not to good on a computer im afraid,not worked out how to post pics yet.i will sell all the parts when the body is fitted and off to the paint shop,dont want to sell any thing i might need.ive bought a 2.8 manual with electric roof.ive never even looked at a z3 before,what a great drivers car.rear wheel drive have always been better.will try and post some pics.

ferrep63 · #5 21st May 2016, 18:40

hi Paul L,sorry for late reply,started today,had a good run out before it went in the garage.its now on axle stands and part stripped.wheels,arch liners,front belly pan,door cards and mirrors all off,needed to have a look at pass window,it was a bit slow and jerky,ive spray siliconed the runners and copper slipped the mechanism.working fine now.trying to post pics!

ferrep63 · #6 21st May 2016, 19:04

no good,can attach image but cant get them onto post.might be just a writen build.

AcC8braman · #7 21st May 2016, 19:10

BMW_Z3-2.8.jpg

tricky360 · #8 21st May 2016, 19:51

Where in the uk are you ?

ferrep63 · #9 21st May 2016, 20:04

how on earth,thats magic!

Paul L · #10 21st May 2016, 20:18

Quote:

Originally Posted by ferrep63

how on earth,thats magic!

I posted this message on a few threads recently, but the principle is the same.

Hope it helps, Paul.

If I click on the attachment "DSC03889.jpg" then you can see both the photo and an "address" at the top of the screen:

http://www.madabout-kitcars.com/foru...2&d=1463770556

If you put [img] in front of that address and then [/img] at the end, the photo will appear in the post.

So the code will look something like this:

[img]http…..0556[/img]

And this will be how it will appear.

AcC8braman · #11 21st May 2016, 20:23

Quote:

Originally Posted by ferrep63

how on earth,thats magic!

You're

and thanks Paul for putting up the How-to

ferrep63 · #12 22nd May 2016, 10:59

pirctures of part strip

ferrep63 · #13 22nd May 2016, 11:02

cheers guys,i think i might of worked it out.

ferrep63 · #14 22nd May 2016, 11:07

two more just to make sure,

ferrep63 · #15 26th May 2016, 08:34

going to finnish stripping my car saturday and prepare it ready for its new body.

ferrep63 · #16 30th May 2016, 19:27

hi all,cars all stripped and ive done the trimming,waiting to fit the body

ferrep63 · #17 17th July 2016, 20:55

hi all,finnished fitting body on this weekend,just my bumbers to do this week,going to paint end of the week.all went well,fixing the central locking was the hardest bit,turned out to be the actuater in the door lock mech.

Danny_HUFC · #18 20th July 2016, 08:27

Good look with the build will be interesting to see 1 come together.

Maybe there should be a section on here for DNA builds as tribute and berini have???

JG · #19 20th July 2016, 16:23

Quote:

Originally Posted by Danny_HUFC

Good look with the build will be interesting to see 1 come together.

Maybe there should be a section on here for DNA builds as tribute and berini have???

If there is enough interest from builders for a separate DNA section (come forward lurkers

) then I will create a new section.

John

ferrep63 · #20 27th July 2016, 21:31

image.jpg