Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Bodywork

Bodywork Share your thoughts, problems and ideas about bodywork related issues

Reply
 
Thread Tools Display Modes
  #1  
Old 1st December 2021, 17:58
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default Has anyone built themselves a GRP hardtop?

As title.... I intend to build a GRP hardtop for a roadster, with the shape similar to a soft top. Intention being to use it in the Winter. Wanting to keep the weight as low as possible, and a good enough finish to paint (probably matt black paint).
Reply With Quote
Available from eBay
  #2  
Old 2nd December 2021, 09:00
kon kon is offline
Senior Member
 
Join Date: Nov 2017
Posts: 109
kon is on a distinguished road
Default

"a roadster"... as in, a z3? If so, should be able to buy all the clips and fixings for the hard top which they made for the car. Shouldnt be too hard to make a thin metal frame which connects all the bits, and then cardboard, parcel tape and grp to connect them. Same with an MX5, and with the price of those hard tops, I wouldnt be surprised if someone has done that a few times already.
I wondered if something like the lightyear fastback top might be a good starting point, if you can find one (or something like it) on this side of the world (light-year are aussie-based).
https://www.miataturbo.net/build-thr...-48089/page28/
Reply With Quote
  #3  
Old 2nd December 2021, 10:08
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Oops... sorry for causing confusion. It's a Calvy Mitchel (hence my user name). - old style roadster. Nearest equivalent is an NG kit car.
Reply With Quote
  #4  
Old 2nd December 2021, 18:26
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

I've seen it done using a timber frame and 1/4" plywood clad with black vinyl. You could glass over the wood and then paint it, depends on what finish you want.
Reply With Quote
  #5  
Old 2nd December 2021, 20:06
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Thanks for your comments lucky. With your experience of GRP, do you consider a horizontal flat panel of the roof with a total of 1200 gsm chopped strand mat would sag over time? If so, maybe adding 5mm nidaplast honeycomb reinforcement and 450 mm layer under may stop it sagging? roughly 1m x 0.8m panel? I'll be grateful for your opinion.
Reply With Quote
  #6  
Old 3rd December 2021, 18:18
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

I'm no GRP expert, best to talk to a laminator for their opinion.
Reply With Quote
  #7  
Old 8th December 2021, 19:35
IanA's Avatar
IanA IanA is offline
Senior Member
 
Join Date: May 2014
Location: Oxon
Posts: 1,118
IanA is on a distinguished road
Default

The Tribute guys could probably take a splash mould of the existing hood and then lay up a basic shape for you. Reinforce it with f/g rope as required.
Reply With Quote
  #8  
Old 14th December 2021, 17:57
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Quote:
Originally Posted by Lucky@LeMans View Post
I'm no GRP expert, best to talk to a laminator for their opinion.
I've tried one of the suppliers to get some guidance - my first thought was to use some coremat in the rooftop to minimise the likelihood of it sagging. the supplier suggested Nidaplast (a honeycomb reinforcement) as it will be lighter than coremat. I used 12mm Nidaplast when I built my caravan, but 5mm will be the one for the hardtop. I don't know any laminators..... maybe they would be reluctant to give their info? But I have a plan. The better weather in Spring may see a start on this, as I plan to do it before I paint the car (in case of spillage!)
Reply With Quote
  #9  
Old 14th December 2021, 19:31
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

Try asking Chris or Dan at Tribute or Gary at Formosa. There's a lot of info on youtube too. There aren't any big secrets , sounds like you are pretty familiar with the stuff having built a caravan ! A small hard top should be quite straight forward.
Reply With Quote
  #10  
Old 16th December 2021, 18:44
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Quote:
Originally Posted by Lucky@LeMans View Post
Try asking Chris or Dan at Tribute or Gary at Formosa. There's a lot of info on youtube too. There aren't any big secrets , sounds like you are pretty familiar with the stuff having built a caravan ! A small hard top should be quite straight forward.
I agree, but it's always useful to get advice from others - there are small things I could do differently if I was to build another caravan, and that may be useful info for someone else similarly. In fact I'd like to build another (of a different design) if only I could sell the one I've got! I do enjoy playing with GRP
Reply With Quote
  #11  
Old 18th December 2021, 17:18
Munky Munky is offline
Senior Member
 
Join Date: Dec 2016
Posts: 174
Munky is on a distinguished road
Default

You could always try a conventional Carson top style, using electrical conduit and chicken wire but…
A grp version of a Carson top is covered in detail here:
https://www.jalopyjournal.com/forum/...on-top.240611/

I’ve had the thought of using the existing hood, wrapped in cling film and tinfoil, to create an original mold. Then make a more structured part from that.

Please post if you do move forward with this!
Reply With Quote
  #12  
Old 19th December 2021, 15:18
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Thanks for that. I planned to use foam board, but now have a fiendish plan to save effort (because I'm lazy). I'll report back with my result (should be by Summer)
Reply With Quote
  #13  
Old 19th December 2021, 20:43
froggyman's Avatar
froggyman froggyman is offline
Senior Member
 
Join Date: Dec 2011
Location: Devon
Posts: 550
froggyman is on a distinguished road
Default

I once saw a JC Midge with a hard top that looked just like a soft top. It was only when the owner tapped on it that you knew it was fibreglass and not canvas. Good luck.
Reply With Quote
  #14  
Old 13th February 2022, 16:10
Lucky@LeMans Lucky@LeMans is offline
Senior Member
 
Join Date: Aug 2012
Posts: 2,142
Lucky@LeMans is on a distinguished road
Default

Have you managed to make any progress so far ?
Reply With Quote
  #15  
Old 13th February 2022, 16:51
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

Pots of resin etc arriving tomorrow - I'll start when the weather gets warmer.
Reply With Quote
  #16  
Old 21st April 2022, 07:55
redratbike's Avatar
redratbike redratbike is offline
Senior Member
 
Join Date: Sep 2011
Posts: 1,446
redratbike is on a distinguished road
Default

did you go for it ?
Reply With Quote
  #17  
Old 21st April 2022, 16:48
Mitchelkitman Mitchelkitman is offline
Senior Member
 
Join Date: Oct 2013
Location: norfolk
Posts: 691
Mitchelkitman is on a distinguished road
Default

I've not had time yet = too busy restoring a mates 60 year old caravan
Reply With Quote
  #18  
Old 22nd April 2022, 06:49
redratbike's Avatar
redratbike redratbike is offline
Senior Member
 
Join Date: Sep 2011
Posts: 1,446
redratbike is on a distinguished road
Default

Quote:
Originally Posted by Mitchelkitman View Post
I've not had time yet = too busy restoring a mates 60 year old caravan
i know how that feels i have been meaning to mould some headlight covers since xmas and just haven
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 23:38.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy