Quote:
Originally Posted by jeremy
thanks for that..aside from the clamps over the bumpers,did you fix it to the cross member below the horns?Was it on for IVA? ta
|
I fitted mine after the SVA test as I wasn't sure about the 'sharp' edges but I did put some clip-on edging along the bottom edge of the nose cone.
It's just fixed with exhaust type 'u' clamps over the bumper struts. I originally used some hose clips but I wasn't sure if they were strong enough. I think it should be fixed to the cross member to stop it flexing too much, but mine isn't.
I can always pretend i'ts like an F1 front wing that changes angle with the speed of the car