brake pedal travel
Hi guys,
I have just had a date for my SVA 19th May.
The trouble is, having provisionally bled the brakes on my own some time ago, I was getting excess travel on the pedal. I wasn't worried then but having bled them again with help, the situation has not improved.
I am using the ABS system off the donor which all worked fine before removal.
I hit upon the idea that that as the sesrvo is mounted about an inch further forward on the 5EXI, i extended the push rod on the servo by an inch.
Not so clever because I cannot fit the master cylinder to the servo. There is too much pressure to push it back to locate it on the servo.
Has anyone else had a similar problem or has any other suggestions.
This kit has done my head in from the start!!!!!
|