I've been fitting some of my carpets today. aaaaaaargh!
Like Patrick, I've found that some of the pieces are cut too short which is very frustrating and annoying that Marlin charge so much for the Interior Trim set and then you find the cut pieces are the wrong size.
The centre tunnel piece is barely long enough and the side pieces are about 2-3" too short. I think they have been cut to patterns to suit the old short wheel base version. (I'll post some pictures later).
This on top of the handbrake gaiter that is too small and the propshaft flange that was too large, really makes you wonder about their quality control which spoils what is still one of the best cars on the market.
I know it's a kit car and you're expected to make a lot of things fit becuase of the individual nature of each chassis but some of these parts are clearly cut or made to the wrong size.
Right,now i've got that off my chest, i'll go and mumble to myself in the garage.
Tip1: if you have bought the Interior Trim set from Marlin, check the sizes of the side pieces well before the day you want to fit them.
Tip2: Fit the pedal rubbers before you fit the pedal box because fitting them in situ is a right pita (and back, elbows, etc)!