I thought i would take advantage of the unusual warm weather and prep the interior before hopefully spraying tomorrow that is if the temperature stays above 10 degree's.
IMG_6270.jpg
Seats firmly attached to the floor with the gearbox tunnel and prop shaft cover fitted for the last time before painting commences in case any adjustments were required.
IMG_6272.jpg
IMG_6271.jpg IMG_6273.jpg
Masked off the areas were no paint is required. First i will apply two coats of etch primer to all the interior followed by silver cellulose on the sides, front bulk head and rear bulk head with black truck liner to the floor panels. If the black does not look right then i may give it a coat or two of the silver cellulose, that is if it does not react with the bed liner so will do a test panel first.
May apply the bed liner to the floor with a roller to give a texture finish.
Well that's it for now see you all soon.
Threaded Mode
