|
Vintage and Classic Roadster Kit Car Builds For Vintage and Classic era kit cars. Post your build reports, problems and progress here |
25th July 2016, 19:12
|
|
Senior Member
Enthusiast
|
|
Join Date: Sep 2004
Posts: 1,893
|
|
Just as important as getting air in is getting it out (as Marlin Sportster owners have found)
Robin
|
25th July 2016, 21:55
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Upside down early S Type in fact. Well spotted!
|
25th July 2016, 21:57
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Quote:
Originally Posted by MartinClan
Just as important as getting air in is getting it out (as Marlin Sportster owners have found)
Robin
|
I know - I have plans for that too
|
25th July 2016, 22:52
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
I like it - if only it was bigger
I wonder if a Morgan grille might work
|
26th July 2016, 07:37
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
|
|
OldJock - I like the thick bars and I am sure it would look at home when the bodywork was adjusted to match.
Good luck, Paul.
|
27th July 2016, 11:47
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
Just had a mess on photoshop using that jaguar grille - could look something like this - [IMG] 1grille 3 by paul ward, on Flickr[/IMG]
|
27th July 2016, 11:48
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
I quite like it, but I'm not sure how hard it would be to change the nose to fit this?
|
27th July 2016, 11:58
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
maybe some sort of 'rivet on' nose cone could be made - [IMG] 1grille 3b by paul ward, on Flickr[/IMG]
|
27th July 2016, 12:28
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Hi Paul, I was thinking more of an aluminium surround which would bolt on to the back of the grille using the existing bolts for the slats and then bond it to the fibreglass of the front of the bodyshell. Perhaps also including some extra mesh like this.
|
27th July 2016, 12:51
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
ahh ok
|
27th July 2016, 13:03
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Thanks for doing the photoshop job, it really is much appreciated and also something I can't do for myself.
Cheers,
Paul
|
27th July 2016, 15:13
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
No worries
|
21st August 2016, 10:35
|
Junior Member
|
|
Join Date: Aug 2016
Posts: 1
|
|
Hi Paul
I will be following your thread with interest. I'm looking for a project and I think the Firano T48 might fit the bill. Like you I've looked at building a 7 type kit but somehow none of them quite do it for me after having owned a Caterham. I fancy something which doesn't scream boy racer but has something with character about it. I've been looking at Morganesque 3 wheelers (JZR, Triking, etc) and Porsche Speedsters.
What I like about the Firano T48 is that it is Spitfire based and although loosely base on a Ferrari it could be one of a number from that era... oh and they look great!
Keep up the good work and I'll keep checking in.
Simon
|
21st August 2016, 14:25
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Quote:
Originally Posted by SlopeSoarer
Hi Paul
I will be following your thread with interest. I'm looking for a project and I think the Firano T48 might fit the bill. Like you I've looked at building a 7 type kit but somehow none of them quite do it for me after having owned a Caterham. I fancy something which doesn't scream boy racer but has something with character about it. I've been looking at Morganesque 3 wheelers (JZR, Triking, etc) and Porsche Speedsters.
What I like about the Firano T48 is that it is Spitfire based and although loosely base on a Ferrari it could be one of a number from that era... oh and they look great!
Keep up the good work and I'll keep checking in.
Simon
|
Hi Simon,
Thanks for the encouraging words. I also had considered the 3 wheelers but, on balance, just thought that they didn't quite offer the opportunity for a little "spirited driving" should the mood or conditions require it. As you say, it could easily be an Alfa or any of the other Italian tuning houses from the post-war years and that's why I love it as I was born in 1950 so am also from the same era! At the moment, progress is slow as I have had a few medical problems, but I am on the mend and hope to get some welding done soon - despite what my wife says We are also going away on holiday in a couple of weeks so more unwanted delay. AARGH! I can honestly say that I think the T48 kit is of a good quality and that Mick (of Fiorano) is a nice guy to deal with and well worth a phone call to have a chat with about the kit build etc. I paid £10 for an e copy of the build manual to have a look at the kit construction plans etc before I made a decision and you get this back if you go ahead and buy the kit from him. The kit comes in small sub-packs which are all well wrapped and itemised on the outside of the packs to help identification and make the assembly order more obvious and easy and all in all I'm very pleased with it. You should also have a chat with Car Photographer as he (another Paul by the way) recently"finished" the build of his T48. See Fiorano T48 Build thread.
Good luck with whichever kit you choose and don't forget to start a build thread - if nothing else, it will help you maintain a bit of momentum.
Cheers,
Paul (A)
|
28th August 2016, 09:30
|
|
Senior Member
|
|
Join Date: Apr 2016
Location: Camberley
Posts: 972
|
|
This is a great thread. I haven't even bought my z3 donor for a tribute build yet, but have started thinking about what next. Haha.
|
30th October 2016, 09:36
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
Hows yours coming along?
I'm still having problems with my wheelarch supports, and now it looks like I may try and fit adjustable dampers onto the suspension to try and 'soften' the ride a little - if it helps it might be something you might want to fit before your body is put on - I'm also considering changing the rear leaf spring for a softer one too.
|
30th October 2016, 17:00
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
Quote:
Originally Posted by Car photographer
Hows yours coming along?
I'm still having problems with my wheelarch supports, and now it looks like I may try and fit adjustable dampers onto the suspension to try and 'soften' the ride a little - if it helps it might be something you might want to fit before your body is put on - I'm also considering changing the rear leaf spring for a softer one too.
|
Hi Paul, Sadly, my build has ground to a standstill, mainly because I am having to spend more time looking after my Mum. It's a shame, but my Mum has to come first and hopefully, I have lots of time left to finish it.
Funny you should mention the shock absorbers and rear spring as they are things I have been looking at myself so I'll be interested in what you go with. Have you spoken with Mick at Fiorano about the wheelarch support problems you have been having? Maybe he could suggest a way forward.
|
30th October 2016, 17:09
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
Sorry to hear that - just stick an armchair in the garage, then you can keep an eye on her while you're working
I've ordered some shocks from jigsaw racing so hopefully they will be ok,
Going to take the car in next week to get the supports remade from solid bar hopefully, so I'll let you know how it goes
|
9th November 2016, 17:58
|
Member
|
|
Join Date: Mar 2016
Posts: 98
|
|
At last, some progress has been made! Of sorts I took my chassis and the parts to modify it to a local welder / blacksmith to have all of the welding work done by him as it had become obvious to me that I simply would not have the time to do it myself. I should get it back on Friday morning ready to apply some rust preventing paint. It should be a good job, as he made the new gates to Glamis Castle, the former family home of the Queen Mum - and they are of a very high quality. So, I'll post a photo in due course.
|
9th November 2016, 18:14
|
Senior Member
|
|
Join Date: Apr 2014
Location: Birmingham, UK
Posts: 545
|
|
Quote:
Originally Posted by Old Jock
At last, some progress has been made! Of sorts I took my chassis and the parts to modify it to a local welder / blacksmith to have all of the welding work done by him as it had become obvious to me that I simply would not have the time to do it myself. I should get it back on Friday morning ready to apply some rust preventing paint. It should be a good job, as he made the new gates to Glamis Castle, the former family home of the Queen Mum - and they are of a very high quality. So, I'll post a photo in due course.
|
cool!!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 12:09.
|