Wiper arm from motor

[SDMC001]

In the manual it shows a piece of meteal being let in for the the arm linking the wiper motor to the wiper arm, can anyone tell me how long that should be.

[craig]

Steve, I was told that it is the standard control arm but shortened and re-crimped back on and that the length was determined after conecting the wiper to power and in the park position!

I am sure someone else will clarify

Craig

[limpabit]

Hi Steve.

I see a great little idea from bigrich.

He cut the wiper arm rivnutted two rivnuts into the cut sections. Then used a threaded rod with two locknuts. That way it could be adjusted as needed.

cheers

John

[SDMC001]

thanks Guys, I dod not mean to mislead you, I am talking about the link that bolts onto the motor via the splined sprocket, and it about 2.5 inches long. I understand that needs altering, or has that now changed.

Steve

[BaldyBonce]

On mine (factory built), the link attached to the motor is approx 7.5cm overall with the pivots approx 5.5cm apart. It gives a full sweep of the screen.

Phil

[SDMC001]

Thanks Phil for your help.


Steve