|
Italian Replica builds and chat Lamborghini, Ferrari, Lancia, any Italian replica car build and chat |
![Old](images/statusicon/post_old.gif)
27th December 2017, 23:26
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
All Aluminium 1957 250 Testarossa
I thought I would start a new build thread for my 250 Testarossa project. I'll get some photos together to show the progress so far and see how it develops.
I managed to purchase a complete Scaglietti inspired, all aluminium body for a 1957 250 Testarossa by Giordanengo. This is an early pontoon fender car, an absolutely stunning looking vehicle and one of my all time favourites.
It is about as close as you will ever get to the real thing, the body was originally fitted to a genuine chassis 0611GT complete with 3 litre V12 and running gear. A tiny number of these cars were coach built by Giordanengo in Italy during the 1980's
The body is mostly straight but there are a few parts missing that I am going to have to fabricate from scratch, namely the scuttle panel and bonnet.
I'll soon be on the look out for a suitable chassis to mount the body onto. Whilst I would love to rebuild it around all Ferrari running gear once again, it is simply just about impossible to source front engine, rear wheel drive base cars at sensible money.
I am going to have to be creative and put my engineering skills to the test !
At the moment I'm thinking spaceframe Lotus 7 style chassis. The live axle cars share a very similar wheel base and track to the original 250 TR. I'm thinking V6 engine so it will at least sound right or close to that high revving V12.
This is going to be a fantastic project !!
Last edited by Lucky@LeMans; 10th January 2019 at 20:26..
|
![Old](images/statusicon/post_old.gif)
28th December 2017, 05:57
|
![redratbike's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=4276&dateline=1325890203) |
Senior Member
|
|
Join Date: Sep 2011
Posts: 1,446
|
|
Alfa v6 to keep the Italian connection ????
|
![Old](images/statusicon/post_old.gif)
28th December 2017, 19:01
|
![lancelot link's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=3326&dateline=1625000475) |
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
Looking forward to seeing this progress ...right up my street ...
Can I badger you every week or so for updates like you did to those poor old Tribute guys ? !!! (joking)
I'd be a bit wary of going too big an engine with an Escort rear axle , if you go the locost type route , maybe look at using a Capri axle or similar ?
|
![Old](images/statusicon/post_old.gif)
28th December 2017, 22:06
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
The Alfa V6 is first rate engine, the only draw back is the width of the unit and the lack of gearbox options for rear wheel drive. It has been done so I won't rule it out at this stage. I did have an Alfa 156 V6, I must admit the exhaust note is something else at high rpm!
Last edited by Lucky@LeMans; 5th January 2019 at 10:03..
|
![Old](images/statusicon/post_old.gif)
29th December 2017, 01:14
|
Member
|
|
Join Date: Nov 2015
Posts: 38
|
|
Excellent project! I would buy a Ferrari 400i with body damage and use the engine, other running gear and VIN number. The added value from it being an actual Ferrari will more than make up the additional cost of the donor. Hietbrink will be able to help with chassis, inner structural panels, etc. See: http://hietbrink.com/
|
![Old](images/statusicon/post_old.gif)
29th December 2017, 15:57
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
Here are a couple of photos of the TR parts. So far I have stripped the remaining paint and gone through all the box's of bits ! There were other bits included not shown in the photos. I have offered the parts up, everything lines up and will go back together without problem.
Last edited by Lucky@LeMans; 5th January 2019 at 16:01..
|
![Old](images/statusicon/post_old.gif)
29th December 2017, 19:13
|
Senior Member
|
|
Join Date: May 2010
Posts: 101
|
|
I was bidding on this also, I have other projects going on and this would of put me in a storage pickle if I bought it, still regret not going for it though
glad you've got it so I can see progress
would a cobra chassis work ?
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 00:39
|
![275NART's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=6392&dateline=1498241927) |
Senior Member
|
|
Join Date: Mar 2015
Location: South Carolina, USA
Posts: 114
|
|
Very cool project!
I'd build on a cobra chassis personally. This guy in SA is building on a cobra chassis with a 1uz toyota v8 http://www.madmechanics.com/forum/bu...a-project.html
Engine options- I'd consider inline 6 options too. Toyota 1jz or 2jz, datsun l series, Nissan rb series, bmw m and s series.
You would have a time fitting a jag v12 in there, trust me!
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 07:28
|
![Paul L's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=4595&dateline=1356794712) |
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,056
|
|
Lucky – Your approach of rebodying a Caterham/Westfield sounds like a very good idea.
I must confess, all I saw was a ‘challenge’ looking at the pile of parts in the advert.
However, I’ve seen photos of this car on Rods ‘n’ Sods which is a different style, but the same principle.
Good luck, Paul. ![Smile](images/smilies/smile.gif)
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 10:30
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
The photo's on the advert were poor, as was the description. The body is all hand crafted aluminium. It is largely complete and it fits back together when you offer it up. I think I have made a good decision here, get it mounted onto a suitable chassis, fit a good strong V6 engine and away we go !
Last edited by Lucky@LeMans; 8th January 2019 at 22:41..
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 11:04
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
This is the actual car before it was dismantled.........
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 11:18
|
![Jaguartvr's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=5932&dateline=1571590790) |
Senior Member
|
|
Join Date: Jan 2014
Location: Egham, Surrey
Posts: 1,780
|
|
Quote:
Originally Posted by Lucky@LeMans
This is the actual car before it was dismantled.........
|
Hard to tell them apart
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 12:46
|
![lancelot link's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=3326&dateline=1625000475) |
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
I really like yellow Ferrari's and silver ones ...but I guess most are going to be red ...
How did the scuttle etc get separated ? do you know ?
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 12:53
|
Senior Member
|
|
Join Date: Jun 2015
Posts: 1,401
|
|
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 13:08
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
I have spoken with the guys that removed the body from the chassis. This was done some time ago and unfortunately the scuttle panel was lost then.
The owner kept the bonnet for his other 250 TR as a spare ! At that time there was no intention to re use the body so it was put into storage.
That video above helped me to identify the car, namely the bulge for the spare wheel in the lower boot area and that little rectangular plate above it. Also the seats and the silver paint in the head light recesses. Those features are unique to this particular car.
Last edited by Lucky@LeMans; 5th January 2019 at 10:12..
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 15:31
|
![redratbike's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=4276&dateline=1325890203) |
Senior Member
|
|
Join Date: Sep 2011
Posts: 1,446
|
|
I think you made a good decision also ...is a 7 chassis the way forward may be easiest but I take it you'll be modifying it somewhat reather than just throwing the body on it
Are there other chassis that may fit like a tr chassis????
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 15:58
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
The 7 style chassis are a good starting point. If you look at the shape of a typical 7 with swept back front wings you will see that the Testarossa has some similarities. The seating position relative to the rear wheels is also similar as is the long nose forward of the cockpit. When the outer panels of a 7 are removed you are left with a neat, light weight space frame. Even down to the suspension, the Testarossa was a live axle at the rear with double wishbones at the front, same as the Westfields etc. Wheel base and track are also very similar and as I said before, I wouldn't want to modify the bodywork to suit a chassis. If a 7 chassis is that close I shouldn't have to modify that either apart from adding mounting points for the body.
Last edited by Lucky@LeMans; 5th January 2019 at 10:13..
|
![Old](images/statusicon/post_old.gif)
1st January 2018, 18:50
|
![redratbike's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=4276&dateline=1325890203) |
Senior Member
|
|
Join Date: Sep 2011
Posts: 1,446
|
|
Quote:
Originally Posted by redratbike
is a 7 chassis the way forward
|
My comment was based on my driving experiences of a 7 ok for short blasts but quite focused and tail happy
|
![Old](images/statusicon/post_old.gif)
1st January 2018, 21:18
|
Senior Member
|
|
Join Date: Aug 2012
Posts: 2,143
|
|
Quote:
Originally Posted by redratbike
My comment was based on my driving experiences of a 7 ok for short blasts but quite focused and tail happy
|
I've owned 2 Westfields and several of the early monocoque Robin Hood 7's all with various engines from a 1600 Ford crossflow to a tuned 3.9 Rover V8. I also had a Ginetta 27 with a Rover V8, with an Escort live axle.
You are right about the characteristics of the 7 but the bigger engines with matched diff ratio make them far more drivable.
Remember the 250 TR was a small car designed for the track first and foremost all be it with a big engine. The original TR must have been a handful with the V12 engine and skinny tyres.
Last edited by Lucky@LeMans; 8th January 2019 at 22:45..
|
![Old](images/statusicon/post_old.gif)
31st December 2017, 17:42
|
![lancelot link's Avatar](image.php?s=8ec059568eec3f76e7a9436aac84114f&u=3326&dateline=1625000475) |
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
I agree ...7 style will work if my previous mockups on a locost are anything to go by ....
|
Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 07:44.
|