Mr T - Thanks for all your encouragement.
Quote:
Originally Posted by AndyP57
Looking like good progress there Donny. Be sure to disconnect the handshake compensator from the underside of the shell too. How do I know? ......
|
D'Oh!
Andy - Thanks for the top tip, although is "Donny" the Northern equivalent of "Mate".
Which leads me to...
Body Shell - Part 4 and a bit: 
Yes, clearly I had not done everything required to remove the body shell last time.
And to make matters worse, the final thing to remove was obviously the hardest to reach.
It was time to jack the car up again and take my chances with a sloping drive & axle stands.
Thankfully just needed to flatten a locating collar and undo one bolt and that was it.
DaveCymru - It gets worse than just some masking tape on bolts...
Obviously there is a note book and sandwich bags involved too!
However, if it makes you feel better, I have these standing by for the frame fitting...
Cheers, Paul.
Threaded Mode
