Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin Sportster, Cabrio, Berlinetta and Roadster builds

Marlin Sportster, Cabrio, Berlinetta and Roadster builds Enthused or Confused about your vintage Marlin build? Ask away here or show off your build.

Reply
 
Thread Tools Display Modes
  #1  
Old 4th November 2011, 10:18
Mike Mike is offline
Senior Member
Enthusiast
 
Join Date: Jan 2007
Posts: 932
Mike is on a distinguished road
Default

Quote:
Originally Posted by GreatOldOne View Post
Wow - seeing the metro and the dual side by side really reinforces how much more assistance you'll get.
My calculations, based on the surface area of the diaphrams, assuming there is one at say 6", and one at 5", suggest around 55% more boost.
However, I read in one of the adverts the gain is only 25% more?

I'll eagerly await your proper road test!
Mike
Reply With Quote
Available from eBay
  #2  
Old 4th November 2011, 11:18
Mike Mike is offline
Senior Member
Enthusiast
 
Join Date: Jan 2007
Posts: 932
Mike is on a distinguished road
Default

Quote:
Originally Posted by Mike View Post
My calculations, based on the surface area of the diaphrams, assuming there is one at say 6", and one at 5", suggest around 55% more boost.
However, I read in one of the adverts the gain is only 25% more?

I'll eagerly await your proper road test!
Mike
Jason

Just a thought..... could the Sportster take an " 8" " booster on the basis the 7" is exactly the same maximum diameter as the Metro?
It would be very tight in the Cabrio, but might have been possible?

You are welcome to try mine before I alter it, as I'll be several months before I am ready to put it in for the dreaded test.
Reply With Quote
  #3  
Old 4th November 2011, 11:46
GreatOldOne's Avatar
GreatOldOne GreatOldOne is offline
Senior Member
Enthusiast
 
Join Date: Sep 2005
Location: Northampton, UK
Posts: 1,891
GreatOldOne is on a distinguished road
Default

Quote:
Originally Posted by Mike View Post
However, I read in one of the adverts the gain is only 25% more?
Yes, but 25% more compared to what? I'd assume that's against a stock yank wagon booster - which when you look at their engine bays (Not small), and the size of the cars (enormous), it wouldn't be a tiny metro-ish servo.

Reply With Quote
  #4  
Old 4th November 2011, 11:49
Mike Mike is offline
Senior Member
Enthusiast
 
Join Date: Jan 2007
Posts: 932
Mike is on a distinguished road
Default

I've just found this whilst googling:

How much pressure should I be getting to the wheels with a power booster?
Typically you should expect about 1000 psi. to the wheels for a disc brake system. A disc brake system requires this amount of pressure so be careful when using a smaller 7" booster that puts out only 900 psi pressure. Use our AC2004K Pressure Tester Kit to get a pressure reading at any point in the braking system.

What size booster do I need?
For lighter weight vehicles like street rods a 7" booster will work fine for disc/drum set ups. For a 4 wheel disc system a 7" booster will not give enough assist. An 8" dual diaphragm booster is the ticket for 4 wheel disc.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 23:38.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy