Quote:
Originally Posted by IanA
+1 from me.
Get the preparation right and you can always sand back to it.
Then- make sure the finish is not too thin- that way you can mop/polish out any surface imperfections.
|
Sound advice. I have been researching DIY painting for lambretta scooters. The advice is per above. Luckily, there is a lot less surface area to fix, so it will be a good start point for me. But that will not be until later in the summer.
There is plenty of advice on the internet, where to source large garden polytunnels at best prices, how to make inexpensive air extractors etc.
Hybrid Mode
