|
Sammio Builds and discussions Sammio bodied car builds and specials |
11th August 2011, 09:21
|
|
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
Sammio / Herald Trailer For Sale.
Will be putting this on Ebay , but thought I would try it here first - would rather it helped a Sammio builder out if it can.
SAMMIO TRAILER
When I started the project , I put this little trailer together.
It started life as a Caravan. A friend bought the van for the interior to put in his camper conversion. It was a very tidy caravan and the running gear , brakes etc are excellent. Very good tyres and a very good spare as well.
I built the trailer in an older style to suit the cars...ie low side rails , skirted mudguards etc..few period stickers etc. I didn't realise just how much I would use the trailer - its taken 66 everywhere in the last year , I have picked up donor Heralds , moved chassis , bodies , kits etc....
The only reason I am moving her on is because we have a bigger trailer now to accomadate the wider G-46 and 550 projects as well.....This trailer was built to accept a Herald / Sammio quite snugly and won't cope with the larger stuff...we haven't room to store 2 trailers otherwise she would stay...
It does need a slight repair to the front , I will do this....and the electric winch works when you by-pass the relay , but it gets hot , so a new relay would be best....the winch has a seperate lead allowing you to walk alongside the car as you load.
Picture below - only difference now is red oxide mudguards...£175
THANK YOU FOR LOOKING
|
11th August 2011, 20:25
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
Could be a deal
Hiya
I see you are selling because you need space, could you keep for the time it takes to prepare me a Sammio? if I pay for it and a deposit for my kit then I could do a one way trailer trip with the body loaded on?
Would benefit me greatly as I am Norfolk based and will need to hire a trailer to collect.
Please let me know if this is an option.
Regards
Psychopops / Stewart
|
12th August 2011, 15:34
|
|
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
Hi,
I have sent you an email .....basically , thats ok. THANK YOU.
I can keep the trailer at home for a bit...we are quoting 4 weeks at present , so I guess thats the time span we are talking about...
So I guess we can consider this sold....
THANKS AGAIN
|
12th August 2011, 16:58
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
Cheers,
Good deal, I will be in touch re kit requirements and to make the transfer.
Thanks again
Stewart
|
13th August 2011, 12:30
|
|
Senior Member
|
|
Join Date: May 2009
Location: POOLE , DORSET
Posts: 2,200
|
|
WELCOME ABOARD - Email received this morning ....THANK YOU
|
4th October 2012, 17:25
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
Trailer for sale ..
Now the inspection is out of the way I no longer need the trailer, It served me well picking up the body from Poole and the inspection today. Not looking for profit and will sell to any Sammio Enthusiast for £175, its cheaper than hiring a trailer for a couple of turns...
If no takers It will go on Ebay but would rather keep it in the family..
You may recognise it as the original Sammio Trailer from Gary..
Cheers Pops
|
4th October 2012, 20:27
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
pic of trailer
Custom made for Triumph / Sammio
|
5th October 2012, 06:43
|
|
Senior Member
|
|
Join Date: Feb 2012
Location: Wembley, London
Posts: 5,058
|
|
If anyone close to London is considering buying this, I'd happily rent it from you for my body inspection which would provide some money towards the cost.
Unfortunately I just do not have any room to store the trailer or I'd buy it myself.
Cheers, Paul.
|
5th October 2012, 09:51
|
|
Senior Member
|
|
Join Date: Jun 2012
Location: Luton
Posts: 133
|
|
What's the total width please?
Other external dimensions would be good too.
|
5th October 2012, 10:52
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
Hi MoriniMan
Dimensions as below,
Hope this helps
Pops
|
6th October 2012, 09:25
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
Reduced
Would like this to go sooner rather than later so would accept £125 for quick sale,
Will put it on Ebay tomorrow if no takers...
Pops
|
6th October 2012, 18:05
|
Member
|
|
Join Date: Aug 2011
Posts: 33
|
|
Hi Pops
I will have it off you for that, could pick it up by next weekend at the latest if that's ok,
Paul.
|
6th October 2012, 18:49
|
|
Senior Member
|
|
Join Date: Jul 2011
Location: Marmande 47200
Posts: 501
|
|
No problem just get in touch when you know when..
Ill PM you my contact details
Last edited by Psycho pops; 6th October 2012 at 18:53..
|
6th October 2012, 19:16
|
Member
|
|
Join Date: Aug 2011
Posts: 33
|
|
Ok thanks send me your details and I'll be in touch asap, cheers
Paul.
|
7th October 2012, 19:30
|
|
Senior Member
|
|
Join Date: Jun 2012
Location: Luton
Posts: 133
|
|
Good that it's found a home here. Due to the narrowness and condition of my access road I doubt I could have got it round to the workshop behind a car.
|
7th October 2012, 20:59
|
Member
|
|
Join Date: Aug 2011
Posts: 33
|
|
MoriniMan, I'm only in Hitchin should you need to borrow it!
|
7th October 2012, 21:08
|
|
Senior Member
|
|
Join Date: Jun 2012
Location: Luton
Posts: 133
|
|
Quote:
Originally Posted by Paulm321
MoriniMan, I'm only in Hitchin should you need to borrow it!
|
Well that's good news!
Let me know if I can help with anything. I have MIG and TIG and a machine shop.
|
7th October 2012, 21:20
|
Member
|
|
Join Date: Aug 2011
Posts: 33
|
|
Quote:
Originally Posted by MoriniMan
Well that's good news!
Let me know if I can help with anything. I have MIG and TIG and a machine shop.
|
Thanks may take you up on that, need engine and gear box mounts making for my MX5 motor, have made some templates but would prefer them made properly.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 07:07.
|