What do I need to know regarding the reversing light?

Email to friend

Add comment

Votes: 0

Comments: 0

Posted: 19 Feb, 2008
by: Madabout-Kitcars ..

Updated: 19 Feb, 2008
by: Madabout-Kitcars ..

You must have a minimum of 1 but no more than 2

It must be directed to the rear

It must be white in colour

It should be controlled by the selection of reverse gear. If not then the switch must have a ‘tell-tale’ indicator present.

Others in this Category

	What do I need to think about when fitting a rear fog light?
	What other lighting considerations must I make?
	What colour lights are acceptable at the rear of the car?
	What colour lights are acceptable at the front of the car?
	Will my car fail SVA if the number plate light is on a separately controlled circuit?
	What do I need to consider when fitting headlights and rear lights (position lights)?
	What are brake light requirements?
	Can I fit side repeaters on the cycle wings of my Seven?
	Do my HT leads need to be of a certain type?
	Electrical wiring pointers
	» More articles

All the SVA information supplied on Madabout-Kitcars.com is done so on a "best efforts" basis and is meant as an informal guide only. We do no warrant or guarantee the information supplied due to the way SVA guidelines can be interpreted from test centre to test centre and because of changes in SVA guidelines by VOSA that we are not made aware of. It is up to you to satisfy yourself on any aspect of your build and SVA by researching the subject, contacting your kit car manufacturer, VOSA or getting hold of the SVA guide from VOSA and making an informed decision based on those factors.

(Knowledge base software)